1. Evaluate the landscape and water supply
Review turf areas, planting beds, sun and shade, existing utilities, property boundaries and available water supply. This assessment guides the proposed system layout and identifies constraints before work starts.
2. Prepare a site-specific irrigation design
A Texas Licensed Irrigator designs the system and zone layout to suit the landscape and expected operating pressure. Determine which permits and inspections are required by the local authority before installation.
3. Plan appropriate zones and sprinkler coverage
Group watering areas thoughtfully so sprinkler types and plant needs fit the available flow. Controller, valve, head and pipe selections should support the planned coverage rather than simply adding more heads to an undersized zone.
4. Install, flush and test the system
After underground piping, valves, wiring, backflow prevention and sprinkler heads are installed, test each zone for proper coverage, pressure and operation. Address leaks or overspray and confirm the controller is programmed for the installed system.
5. Adjust watering and maintain performance
Water schedules may need adjustments with season, weather and changing landscaping. Periodic inspections help catch blocked heads, leaks, damaged components and changes in coverage before they become bigger problems.
For a property-specific recommendation, talk to Rain Day Irrigation about your existing conditions and the work you have in mind.